Hello! Shenzhen Win-drive Automation Equipment Co., Ltd. welcomes you!
0755-82113520、13823217507(WeChat)Site map|Legal Notice|Chinese
Current location: Home Product NEUGART Planetary Gearbox with Output Shaft PLQE
  • Planetary Gearbox with Output Shaft PLQE
  • Planetary Gearbox with Output Shaft PLQE
  • Planetary Gearbox with Output Shaft PLQE
  • Planetary Gearbox with Output Shaft PLQE
  • Planetary Gearbox with Output Shaft PLQE
  • Planetary Gearbox with Output Shaft PLQE
  • Planetary Gearbox with Output Shaft PLQE
  • Planetary Gearbox with Output Shaft PLQE
Planetary Gearbox with Output Shaft PLQE

The easy to install planetary gearbox absorbs high forces with low heat generation.

Our PLQE is uncomplicated and powerful. It can be connected directly to your installation without the need for an intermediate flange. The large deep groove ball bearing at the output can absorb large axial and radial forces. In the process, only little heat is generated, so reliable operations are assured even in complex production cycles.


PLQE planetary gearbox is a planetary gearbox that can be easily installed in the NEUGART series. This gearbox has low calorific value and can withstand relatively high radial and axial forces; the output end is equipped with a deep groove ball Roller bearings have the characteristics of high load capacity and low heat generation.

Introduction of PLQE gearbox

The PLQE gearbox has three sizes of 60, 80, and 120 to choose from. Like the PLE model, 3 sets of planetary gear carriers can be installed. A total of 24 speed ratios from 3 to 512 can be selected. It can be matched with a variety of different types of stepper motors. and servo motors. The PLQE economical gearbox adopts a square output flange, and the output shaft can be selected from various specifications. It has the advantages of the coaxial gearbox series. The reinforced deep groove ball bearing developed by NEUGART does not require additional bearing components, and its driving components can be Mounted directly on the output shaft, this gearbox is suitable for high-load situations. Square output flange with through holes, so this gearbox can be mounted directly on the equipment, saving time and cost. When installing, it can be installed at any deceleration through the through hole of the gearbox. It can be seen that with this gearbox, the structure design will become simple and convenient. The calorific value of NEUGART at high speed is also very low. The developed low friction loss bearing structure and optimized lubrication function enable PLQE to easily cope with some extreme challenges.


PLQE gearbox can work in extreme environment of -25℃-90℃; IP54 protection grade; standard lubrication, low temperature lubrication and food grade lubrication, a total of three lubrication methods can be selected; because of its compact structure, any installation can be adopted The installation method is simple and convenient; the torsional stiffness is in the range of 2.8-19Nm, and the specific data changes according to the selection plan; the weight of the gearbox is selected between 1.1-10.1Kg. The detailed data of this gearbox is recorded in the NEUGART selection sample, and the technology can also provide comprehensive data on the coordination of the gearbox and the motor during the selection process.


PLQE gearbox is suitable for high load situations, such as truss, processing, printing and other industries. Shenzhen Win-drive Automation Equipment Co., Ltd. provides a full range of NEUGART products, professional technology provides a full range of selection solutions, professional NCP selection software technical support, docking with NEUGART gearbox company, fast quotation, short delivery time.

Product advantages

Easy installation, low calorific value, high load capacity, simple structure, no need for intermediate flange installation, safe and reliable operation



Various types of output shafts


Optimized tensioning system

Various types of drive flanges



Machine tools, food industry, printing industry, agricultural product industry


Low calorific value at high speed

Optimized output bearing

Square output flange

High dynamics in multi-axis systems

Can be installed anywhere

precise meshing

The NEUGART economical series gearbox has a variety of models and meets the needs of various application scenarios. It is widely used in machine tools, lithium batteries, laser cutting, robots and other industries. NCP selection and selection software, input the gearbox requirements or motor model and match the corresponding gearbox/motor model, online drawing, simple and convenient operation, intuitive and easy to understand drawings, CAD, 3D drawing styles are various, for selection reference, the data is detailed and clear . Different types of products can be selected for different application requirements. With the change of motor or application, more models can be selected by contacting technical communication.

Gearbox characteristics PLQE060 PLQE080 PLQE120 P
Reduer 3, 4, 5, 7, 8, 10 1
Reduer 9, 12, 15, 16, 20, 25, 32, 40, 64 2
Reduer 60, 80, 100, 120, 160, 200, 256, 320, 512 3
Service life h 30.000
Efficiency at full load % 98/97/92
Min operating temperature/max operating temperature -25/90
Protection class IP54
Standard lubrication Grease (lifetime lubrication)
Food grade lubrication Grease (lifetime lubrication)
Low temperature lubrication Grease (lifetime lubrication)
Lnstallation location Any
Standard return clearance arcmin <10-<15 <7-<11 <7-<11
Torsional stiffness Nm/arcmin 2.8-4.1 8.5-13.4 14.0-19.0
Reducer weight kg 1.1-1.5 2.7-4.0 6.4-10.1
Standard case surface Housing: Steel - heat-treated and post-oxidized(black)
Running noise dB/(A) 58 60 65
Max bending moment based on the gearbox input flange Nm 8 16 40

Nominal output torque

28 85 115 3 1
38 115 155 4
40 110 195 5
25 65 135 7
18 50 120 8
15 38 95 10
44 130 210 9 2
44 120 260 12
44 110 230 15
44 120 260
44 120 260 20
40 110 230 25
44 120 260 32
40 110 230 40
18 50 120 64
44 110 260 60 3
44 120 260 80
44 120 260 100
44 110 230 120
44 120 260 160
40 110 230 200
44 120 260 256
40 110 230 320
18 50 120 512

Output shaft loads

PLQE060   PLQE080  PLQE120

 Radial force for 20000h/30000h

N   700-900 1700-2050 2400-2950
Axial force for 20000h/30000h N   800-1000 2000-2500 2100-2500
Tilting moment for 20000h  Nm 37 102   232


PLQE060  PLQE080 PLQE120 等级
Shaft diameter output mm 16
20 25
Centering diameter output mm 60 80 110
Housing diameter mm 60 80 115
Flange cross section input mm 70 90 115
Min.total length mm 111.0 145.0 201.5 1
123.5 162.5 229.5
136.0 180.0 257.0 3
Shaft length output mm 32 40 55

Related Products
Tel: 0755-82113520, 13823217507  
E-mail: sales@sz -windrive. com  
URL: sxzxsdf.com com  
Address: room 708, MaoYuan building, No. 9, Songyuan Road, Guiyuan street, Luohu District, Shenzhen  


Shenzhen Win-Drive Automation Equipment Co., Ltd.  ALL RIGHT RESERVED